A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

R

r - Variable in class com.openinventor.inventor.SbMatrix.Factorization

r - Variable in class com.openinventor.inventor.SbMatrixd.Factorization

r - Variable in class com.openinventor.meshviz.graph.PoCircle3ThreePoints

Third point of the circle.

r - Variable in class com.openinventor.meshviz.graph.PoCircleThreePoints

Third point of the circle.

r - Variable in class com.openinventor.meshviz.graph.PoParallelogram

Third point of the parallelogram.

r - Variable in class com.openinventor.meshviz.graph.PoParallelogram3

Third point of the parallelogram.

radians - Variable in class com.openinventor.inventor.SbRotation.AxisAngle

radians - Variable in class com.openinventor.inventor.SbRotationd.AxisAngle

radius - Variable in class com.openinventor.inventor.engines.SoTrackFollower

Radius of the turn at a control point.

radius - Variable in class com.openinventor.inventor.nodes.SoAlgebraicCone

Specifies the radius of the base circle.

radius - Variable in class com.openinventor.inventor.nodes.SoAlgebraicCylinder

Specifies the cylinder's radius.

radius - Variable in class com.openinventor.inventor.nodes.SoAlgebraicSphere

Radius of sphere.

radius - Variable in class com.openinventor.inventor.nodes.SoBevelProperty

This defines the bevel radius (the size of the rounded edge or corner).

radius - Variable in class com.openinventor.inventor.nodes.SoCircularExtrusion

Radius of the circular cross-section.

radius - Variable in class com.openinventor.inventor.nodes.SoCylinder

Specifies the cylinder's radius.

radius - Variable in class com.openinventor.inventor.nodes.SoSphere

Radius of sphere.

radius - Variable in class com.openinventor.meshviz.graph.PoAngularAxis

Radius of the axis.

radius - Variable in class com.openinventor.meshviz.graph.PoCircle3CenterRadius

Circle radius.

radius - Variable in class com.openinventor.meshviz.graph.PoCircleArcCtrRadTwoAngle

Circle radius.

radius - Variable in class com.openinventor.meshviz.graph.PoCircleCenterRadius

Circle radius.

radius - Variable in class com.openinventor.meshviz.graph.PoCylindricalBar

Defines the radius used for each cylindrical bar.

radius - Variable in class com.openinventor.meshviz.graph.PoPieChart

Radius of the pie chart.

radius - Variable in class com.openinventor.meshviz.nodes.PoBevelEdge

Indicates the radius of the bevel.

radius - Variable in class com.openinventor.meshviz.nodes.PoCircularProfile

Radius of the circle defining the profile.

radius - Variable in class com.openinventor.meshvizxlm.mapping.nodes.MoMeshCylinderSlice

Specifies the cylinder's radius.

radius - Variable in class com.openinventor.meshvizxlm.mapping.nodes.MoMeshSphereSlice

Specifies the sphere's radius.

radiusFlag - Variable in class com.openinventor.meshviz.nodes.PoBevelEdge

Defines the interpretation of the field radius.

radiusMax - Variable in class com.openinventor.meshviz.graph.PoPieChartRep

Defines the maximum radius of the pie chart.

radiusMin - Variable in class com.openinventor.meshviz.graph.PoPieChartRep

Defines the mininum radius of the pie chart.

radiusRange - Variable in class com.openinventor.imageviz.engines.imagemanipulation.syntheticimages.SoRandomSphereGeneration3d

The min and max size of radius (for Uniform distribution) or mean and standard deviation (for gaussian distribution).

radiusRange - Variable in class com.openinventor.imageviz.engines.imagesegmentation.classification.SoSupervisedTextureClassificationProcessing2d

The minimum and maximum radius of the circular neighborhoods used for computing textural features.

radiusRange - Variable in class com.openinventor.imageviz.engines.imagesegmentation.classification.SoSupervisedTextureClassificationProcessing3d

The minimum and maximum radius of the circular neighborhoods used for computing textural features.

radiusStep - Variable in class com.openinventor.imageviz.engines.imagesegmentation.classification.SoSupervisedTextureClassificationProcessing2d

The step used to define the set of radius between minimum and maximum.

radiusStep - Variable in class com.openinventor.imageviz.engines.imagesegmentation.classification.SoSupervisedTextureClassificationProcessing3d

The step used to define the set of radius between minimum and maximum.

raiseFilterType - Variable in class com.openinventor.meshviz.graph.PoCurve

Defines the type of raise filter.

raiseIndexList - Variable in class com.openinventor.meshviz.graph.PoCurve

A list of points (of point) is selected by their indices.

raiseIndexPeriod - Variable in class com.openinventor.meshviz.graph.PoCurve

One point (of point) in every consecutive raiseIndexPeriod is selected.

raiseThreshold - Variable in class com.openinventor.meshviz.graph.PoCurve

Raise points are vertical lines joining the curve points and the specified threshold.

raiseXList - Variable in class com.openinventor.meshviz.graph.PoCurve

A list of points (of the computed curve points) is selected by their abscises.

raiseXPeriod - Variable in class com.openinventor.meshviz.graph.PoCurve

One point (of the computed curve points) in every raiseXPeriod is selected.

rakeLength - Variable in class com.openinventor.meshviz.data.PoStreamSurface

Length of each rake-source.

rakeOrientation - Variable in class com.openinventor.meshviz.data.PoStreamSurface

Orientation of the rake-sources.

ramp - Variable in class com.openinventor.inventor.engines.SoOneShot

( SoSFFloat ) Ramps linearly from 0.0 to 1.0.

range - Variable in class com.openinventor.inventor.geo.SoGeoLOD

World-space distance to use as switching criteria.

range - Variable in class com.openinventor.inventor.nodes.SoDepthBuffer

Value range for the depth buffer (glDepthRange).

range - Variable in class com.openinventor.inventor.nodes.SoLOD

World-space distances to use as switching criteria.

rangeMode - Variable in class com.openinventor.imageviz.engines.imageanalysis.globalmeasures.SoIntensityHistogramQuantification

This parameter defines if the histogram has to be computed between the minimum and maximum input intensities (MIN_MAX) or inside a predefined range (OTHER).

rangeMode - Variable in class com.openinventor.imageviz.engines.imageanalysis.statistics.SoAutoThresholdingQuantification

The input intensity range.

rangeMode - Variable in class com.openinventor.imageviz.engines.imageanalysis.statistics.SoIntensityStatisticsQuantification

Select the input intensity range mode.

rangeMode - Variable in class com.openinventor.imageviz.engines.imagefiltering.grayscaletransforms.SoHistogramEqualizationProcessing

Select the input intensity range mode.

rangeMode - Variable in class com.openinventor.imageviz.engines.imagefiltering.grayscaletransforms.SoRescaleIntensityProcessing

Select the input intensity range mode.

rangeMode - Variable in class com.openinventor.imageviz.engines.imagesegmentation.binarization.SoAutoThresholdingProcessing

Select the input intensity range mode.

rangeScaling - Variable in class com.openinventor.inventor.nodes.SoVertexShaderParameter4b

Indicates if values shall be scaled to a normalized range when they are loaded.

rangeScaling - Variable in class com.openinventor.inventor.nodes.SoVertexShaderParameter4i

Indicates if values shall be scaled to a normalized range when they are loaded.

rangeScaling - Variable in class com.openinventor.inventor.nodes.SoVertexShaderParameter4s

Indicates if values shall be scaled to a normalized range when they are loaded.

rangeScaling - Variable in class com.openinventor.inventor.nodes.SoVertexShaderParameter4ub

Indicates if values shall be scaled to a normalized range when they are loaded.

rangeScaling - Variable in class com.openinventor.inventor.nodes.SoVertexShaderParameter4ui

Indicates if values shall be scaled to a normalized range when they are loaded.

rangeScaling - Variable in class com.openinventor.inventor.nodes.SoVertexShaderParameter4us

Indicates if values shall be scaled to a normalized range when they are loaded.

rayIntersection - Variable in class com.openinventor.inventor.nodes.SoAlgebraicShape

Field for an SoFragmentShader object that defines the GLSL ray intersection function.

rayPick(SoRayPickAction) - Method in class com.openinventor.inventor.nodes.SoNode

rayPick(SoRayPickAction) - Method in class com.openinventor.meshvizxlm.mapping.nodes.MoActionNode

read(SbRasterImage) - Method in class com.openinventor.inventor.image.SoRasterImageRW

Calls read(rasterImage, false).

read(SbRasterImage, boolean) - Method in class com.openinventor.inventor.image.SoRasterImageRW

Read the current open image into rasterImage.

read(SoInput) - Static method in class com.openinventor.inventor.SoDB

Reads a graph from the file specified by the given SoInput, returning the resulting root node.

readAll(SoInput) - Static method in class com.openinventor.inventor.SoDB

Reads all graphs and paths from the file specified by the given SoInput.

readDicomHeader(String) - Method in class com.openinventor.volumeviz.readers.SoVRDicomData

Reads the DICOM file header.

readDicomImage(String) - Method in class com.openinventor.volumeviz.readers.SoVRDicomData

Reads the DICOM image.

readError - Variable in class com.openinventor.ldm.readers.SoVolumeReader.DataInfo

readFile(String) - Static method in class com.openinventor.medical.helpers.MedicalHelper

Convenience function to read a .iv file and return pointer to the root of the created scene graph.

readFloat() - Method in class com.openinventor.util.AsciiStreamReader

Return the current token as a float.

readInt() - Method in class com.openinventor.util.AsciiStreamReader

Return the current token as an integer.

readlock() - Static method in class com.openinventor.inventor.SoDB

Acquire a non-exclusive global scene graph read-lock.

readNextFloat() - Method in class com.openinventor.util.AsciiStreamReader

Read the next float in this stream.

readNextInt() - Method in class com.openinventor.util.AsciiStreamReader

Read the next integer in this stream.

readNextString() - Method in class com.openinventor.util.AsciiStreamReader

Read the next string in this stream.

readNode(SoInput) - Static method in class com.openinventor.inventor.SoDB

readPath(SoInput) - Static method in class com.openinventor.inventor.SoDB

Reads a graph from the file specified by the given SoInput, returning the resulting path.

readRegion(SbRasterImage, SbBox2i32) - Method in class com.openinventor.inventor.image.SoRasterImageRW

Read the specified region of current open image into rasterImage.

readTexture(String) - Static method in class com.openinventor.inventor.nodes.SoTexture

Calls readTexture(filename, SoTexture.FileTypes.valueOf( SoTexture.FileTypes.UNKNOWN.getValue() )).

readTexture(String, SoTexture.FileTypes) - Static method in class com.openinventor.inventor.nodes.SoTexture

Convenience function that loads the image data from any texture file supported by Open Inventor and returns an SbRasterImage object.

readTile(SoLDMTileID, SoBufferObject, boolean) - Method in class com.openinventor.ldm.nodes.SoDataSet

Copies the specified tile into the provided buffer.

readTile(int, SbBox3i32) - Method in class com.openinventor.ldm.readers.SoVolumeReader

Given an index, reads a tile if the data is organized in tiles (for LDM).

readTile(int, SoBufferObject, SbBox3i32) - Method in class com.openinventor.ldm.readers.SoVolumeReader

Deprecated.

As of Open Inventor 8500 Use SoBufferObject* readTile(int index, const SbBox3i32& tilePosition) instead.

readunlock() - Static method in class com.openinventor.inventor.SoDB

Release a non-exclusive global scene graph read-lock.

reallocate(int) - Method in class com.openinventor.inventor.misc.SoColorPacker

rebuild() - Method in class com.openinventor.meshviz.graph.PoBase

Forces the node kit to be rebuilt immediately.

recalc() - Method in class com.openinventor.inventor.nodes.SoAntiSquish

Sets a flag so that the next time the node is traversed, it will recalculate its unsquishing matrix.

recalcAlways - Variable in class com.openinventor.inventor.nodes.SoAntiSquish

If recalcAlways is true, this node calculates its unsquishing matrix every time it is traversed.

recenter(SbVec3f) - Method in class com.openinventor.inventor.nodes.SoTransform

Changes the center of the transformation to the given point without affecting the overall effect of the transformation.

recognize(SoEvent) - Method in class com.openinventor.inventor.gestures.recognizers.SoGestureRecognizer

If the specified touch event completes a recognized gesture, returns an SoGestureEvent, else returns null.

reconstructMode - Variable in class com.openinventor.imageviz.engines.mathematicalmorphology.geodesictransformations.SoGrayscaleResconstructionProcessing

Select the reconstruction mode to use.

record() - Method in class com.openinventor.inventor.mpeg.SoMPEGRenderer

Starts the recording.

recordFrame() - Method in class com.openinventor.inventor.mpeg.SoMPEGFrameRenderer

Calls recordFrame((float)0).

recordFrame(float) - Method in class com.openinventor.inventor.mpeg.SoMPEGFrameRenderer

Adds a new frame to the current MPEG output.

redoEditing(int) - Method in class com.openinventor.ldm.nodes.SoDataSet

Redo all modifications associated with the specified transaction id.

refetchNotify() - Method in class com.openinventor.ldm.tiles.SoBufferAsyncNotifierInterface

Notify an object that a buffer implementing SoBufferAsyncInterface has change its state.

refinementDelay - Variable in class com.openinventor.inventor.nodes.SoInteractiveComplexity

Time in seconds after interaction stops before field values start to be increased.

regionalOperator - Variable in class com.openinventor.imageviz.engines.mathematicalmorphology.geodesictransformations.SoHExtremaProcessing

Select the operator.

regionalOperator - Variable in class com.openinventor.imageviz.engines.mathematicalmorphology.geodesictransformations.SoRegionalExtremaProcessing

Select the operator.

registerFeedback(String, SoBufferObject) - Method in class com.openinventor.inventor.nodes.SoVertexAttribFeedback

Calls registerFeedback(varyingName, bufferObject, (int)-1).

registerFeedback(String, SoBufferObject, int) - Method in class com.openinventor.inventor.nodes.SoVertexAttribFeedback

This function allows to attach a buffer object to a specific varying of the shader pushed on the state.

RegistrationEvent(SoImageVizEngine, float, double, SbMatrix) - Constructor for class com.openinventor.imageviz.engines.geometryandmatching.registration.SoImageRegistrationTransform.RegistrationEvent

Default constructor.

regular - Variable in class com.openinventor.inventor.SoPath

access to all public nodes in the path except hidden children in nodekits.

reInit(SoState, SoNode) - Static method in class com.openinventor.inventor.elements.SoVertexFlagElement

reinitialize() - Method in class com.openinventor.inventor.SoSceneManager

Reinitializes graphics.

relative - Variable in class com.openinventor.ldm.nodes.SoROI

Specifies whether the box bounds are relative to the subvolume or the full volume (i.e., are specified in absolute slice coordinates).

relativeOffset - Variable in class com.openinventor.meshvizxlm.mapping.nodes.MoMeshCellShape

When set to true the distance between the node and the name to display is relative to the size of the cell.
Note: For unstructured meshes, the offset field is then multiplied by the getRelativeSize() method from the cell interface.

release(SoDeviceContextSharedGroup) - Method in class com.openinventor.inventor.caches.SoBaseContextCache

This function is called when a context has been requested to delete the context through the SoDeviceContext.dispose() method.

release() - Method in class com.openinventor.inventor.devices.SoBaseContextObject

This function is called by the attached context when it has been requested to delete the context through the SoDeviceContext.dispose() method.

releaseData(SoLDMTileID) - Method in class com.openinventor.ldm.SoLDMDataAccess

Tells VolumeViz that this block of data (returned by getData above) is no longer in use by the application.

releaseEvents() - Method in class com.openinventor.inventor.nodes.SoEventCallback

Tells the event callback node to release the grab of events.

releaseGrabber() - Method in class com.openinventor.inventor.actions.SoHandleEventAction

Releases the grab.

remainder(SbTime) - Method in class com.openinventor.inventor.SbTime

Modulus for two times (remainder when time1 is divided by time2).

remove(SoDeviceContext) - Method in class com.openinventor.inventor.devices.SoDeviceContextSharedGroup

Removes a device context from the group.

remove(SoNode, int) - Method in class com.openinventor.inventor.misc.SoTranSender

Adds a REMOVE command to the transcription area.

removeAllChildren() - Method in class com.openinventor.inventor.nodes.SoGroup

Removes all children from group.

removeAllFieldContainers() - Method in class com.openinventor.inventor.fields.SoMFFieldContainer

Removes all fieldContainers from group.

removeAllListeners() - Method in class com.openinventor.remoteviz.rendering.RenderArea

Removes all RenderAreaListeners.

removeAllListeners() - Method in class com.openinventor.remoteviz.rendering.Service

Removes all ServiceListeners.

removeAllNodes() - Method in class com.openinventor.inventor.fields.SoMFNode

Removes all nodes from group.

removeAllShaderParameters() - Method in class com.openinventor.inventor.fields.SoMFUniformShaderParameter

Removes all uniform shader parameters from group.

removeAllStringsSet() - Method in class com.openinventor.meshviz.data.PbMesh

Remove all sets of strings values.

removeAllValuesSet() - Method in class com.openinventor.meshviz.data.PbMesh

Remove all sets of scalar values.

removeAllVecsSet() - Method in class com.openinventor.meshviz.data.PbMesh

Remove all sets of vector values.

removeAlphaChannel() - Method in class com.openinventor.inventor.image.SbRasterImage

Removes the Alpha channel from the current raster image.

removeBBoxCollisionListener(SoCollisionManager.BBoxCollisionListener) - Method in class com.openinventor.inventor.collision.SoCollisionManager

Removes bounding box collision callback.

removeChangeCallback(SoSelectionClassCB) - Method in class com.openinventor.inventor.nodes.SoSelection

removeChangeCallback(SoSelectionClassCB, Object) - Method in class com.openinventor.inventor.nodes.SoSelection

removeChild(SoNode) - Method in class com.openinventor.inventor.nodekits.SoNodeKitListPart

Removes first instance of given child from nodekit.

removeChild(int) - Method in class com.openinventor.inventor.nodekits.SoNodeKitListPart

Removes child with given index from the nodekit.

removeChild(SoNode) - Method in class com.openinventor.inventor.nodes.SoGroup

Removes first instance of given child from group.

removeChild(int) - Method in class com.openinventor.inventor.nodes.SoGroup

Removes child with given index from group.

removeCollisionListener(SoCollisionManager.CollisionListener) - Method in class com.openinventor.inventor.collision.SoCollisionManager

Removes collision callback.

removeConverter(Class<? extends Inventor>, Class<? extends Inventor>) - Static method in class com.openinventor.inventor.SoDB

Remove a previously added converter.

removeDefaultRecognizers() - Method in class com.openinventor.inventor.touch.SoTouchManager

Remove the default recognizers from the recognizer list.

removeDeselectionCallback(SoSelectionPathCB) - Method in class com.openinventor.inventor.nodes.SoSelection

see SoSelection.addDeselectionCallback(SoSelectionPathCB, Object)

removeDeselectionCallback(SoSelectionPathCB, Object) - Method in class com.openinventor.inventor.nodes.SoSelection

see SoSelection.addDeselectionCallback(SoSelectionPathCB, Object)

removeDirectory(String) - Static method in class com.openinventor.inventor.SoInput

Removes named directory from the list.

removeEventCallback(Class, SoEventCallbackCB, Object) - Method in class com.openinventor.inventor.nodes.SoEventCallback

Same as SoEventCallback.removeEventCallback(String eventClassName, SoEventCallbackCB f, Object userData).

removeEventCallback(String, SoEventCallbackCB, Object) - Method in class com.openinventor.inventor.nodes.SoEventCallback

Removes the callback function specified by addEventCallback.

removeEventListener(SbEventListener<E>) - Method in class com.openinventor.inventor.SbEventHandler

Remove a listener.

removeFieldContainer(int) - Method in class com.openinventor.inventor.fields.SoMFFieldContainer

Removes fieldContainer with given index from group.

removeFieldContainer(SoFieldContainer) - Method in class com.openinventor.inventor.fields.SoMFFieldContainer

Removes first instance of given fieldContainer from group.

removeFile(String) - Static method in class com.openinventor.inventor.helpers.SbFileHelper

Removes the specified file.

removeFile(String) - Method in class com.openinventor.inventor.sensors.SoFileSensor

Remove file from monitored list.

removeFinishCallback(SoDraggerCB, Object) - Method in class com.openinventor.inventor.draggers.SoDragger

Removes finish callback.

removeFinishCallback(SoSelectionClassCB) - Method in class com.openinventor.inventor.nodes.SoSelection

see SoSelection.addFinishCallback(SoSelectionClassCB, Object)

removeFinishCallback(SoSelectionClassCB, Object) - Method in class com.openinventor.inventor.nodes.SoSelection

see SoSelection.addFinishCallback(SoSelectionClassCB, Object)

removeInteractionModeListener(SceneExaminer.InteractionModeListener) - Method in class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderAreaExaminer

removeInteractionModeListener(SceneExaminer.InteractionModeListener) - Method in interface com.openinventor.inventor.viewercomponents.awt.IRenderAreaExaminer

Removes the specified listener so that it no longer receives notifications of interaction mode changes.

removeInteractionModeListener(SceneExaminer.InteractionModeListener) - Method in class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderAreaExaminer

removeInteractionModeListener(SceneExaminer.InteractionModeListener) - Method in class com.openinventor.inventor.viewercomponents.nodes.SceneExaminer

Removes the specified listener so that it no longer receives notifications of interaction mode changes.

removeInteractionModeListener(SceneExaminer.InteractionModeListener) - Method in class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderAreaExaminer

removeListener(MetricsListener) - Method in class com.openinventor.remoteviz.rendering.Monitoring

Removes a listener for metrics.

removeListener(RenderAreaListener) - Method in class com.openinventor.remoteviz.rendering.RenderArea

Removes a RenderAreaListener.

removeListener(ServiceListener) - Method in class com.openinventor.remoteviz.rendering.Service

Removes a ServiceListener.

removeLoadListener(SoLDMGlobalResourceParameters.LoadListener) - Static method in class com.openinventor.ldm.SoLDMGlobalResourceParameters

removeMarker(int) - Static method in class com.openinventor.inventor.nodes.SoIndexedMarkerSet

Remove the marker with index markerIndex .

removeMarker(int) - Static method in class com.openinventor.inventor.nodes.SoMarkerSet

Remove the marker with index markerIndex .

removeMotionCallback(SoDraggerCB, Object) - Method in class com.openinventor.inventor.draggers.SoDragger

Removes motion callback.

removeNode(int) - Method in class com.openinventor.inventor.fields.SoMFNode

Removes node with given index from group.

removeNode(SoNode) - Method in class com.openinventor.inventor.fields.SoMFNode

Removes first instance of given node from group .

removeParameterByName(String) - Method in class com.openinventor.inventor.fields.SoMFInstanceParameter

Remove the instance parameter with the specified name.

removePart(SoCone.PartType) - Method in class com.openinventor.inventor.nodes.SoCone

Convenience function to turn off a part of the cone.

removePart(SoCylinder.PartType) - Method in class com.openinventor.inventor.nodes.SoCylinder

Convenience function to turn off a part of the cylinder.

removePlugin(String) - Static method in class com.openinventor.inventor.SoDB

Unloads the specified plugin library.

removePluginsDirectory(String) - Static method in class com.openinventor.inventor.SoDB

Remove directory from the list of search directories for plugin loading.

removeProbeCallback() - Method in class com.openinventor.meshvizxlm.mapping.nodes.MoMeshPointProbe

Removes the user defined probe callback (see MoMeshPointProbe.setProbeCallback(MoProbeCallback)) which will disable the node.

removeRecognizer(SoGestureRecognizer) - Method in class com.openinventor.inventor.touch.SoTouchManager

Remove a gesture recognizer from the recognizer list.

removeSelectionCallback(SoSelectionPathCB) - Method in class com.openinventor.inventor.nodes.SoSelection

see SoSelection.addSelectionCallback(SoSelectionPathCB, Object)

removeSelectionCallback(SoSelectionPathCB, Object) - Method in class com.openinventor.inventor.nodes.SoSelection

see SoSelection.addSelectionCallback(SoSelectionPathCB, Object)

removeShaderParameter(SoUniformShaderParameter) - Method in class com.openinventor.inventor.fields.SoMFUniformShaderParameter

Removes first instance of given uniform shader parameter from group.

removeShaderParameter(int) - Method in class com.openinventor.inventor.fields.SoMFUniformShaderParameter

Removes uniform shader parameter with given index from group.

removeShaderParameter(String) - Method in class com.openinventor.inventor.fields.SoMFUniformShaderParameter

Removes first instance of given uniform shader parameter with given name from group.

removeSliderPanelListener(SliderPanel.Listener) - Method in class com.openinventor.inventor.viewercomponents.awt.tools.SliderPanel

removeStartCallback(SoDraggerCB, Object) - Method in class com.openinventor.inventor.draggers.SoDragger

Removes start callback.

removeStartCallback(SoSelectionClassCB) - Method in class com.openinventor.inventor.nodes.SoSelection

see SoSelection.addStartCallback(SoSelectionClassCB, Object)

removeStartCallback(SoSelectionClassCB, Object) - Method in class com.openinventor.inventor.nodes.SoSelection

see SoSelection.addStartCallback(SoSelectionClassCB, Object)

removeStringsSet(int) - Method in class com.openinventor.meshviz.data.PbMesh

Remove a set of string values.

removeValueChangedCallback(SoDraggerCB, Object) - Method in class com.openinventor.inventor.draggers.SoDragger

Removes value-changed callback.

removeValuesSet(int) - Method in class com.openinventor.meshviz.data.PbMesh

Remove a set of scalar values.

removeVecsSet(int) - Method in class com.openinventor.meshviz.data.PbMesh

Remove a set of vector values.

renameGlobalField(String, String) - Static method in class com.openinventor.inventor.SoDB

Renames the global field named oldName.

render() - Method in class com.openinventor.inventor.SoOffscreenRenderArea

Applies an SoGLRenderAction to the scene graph managed here.

render(boolean) - Method in class com.openinventor.inventor.SoSceneManager

Deprecated.

render() - Method in class com.openinventor.inventor.SoSceneManager

Applies an SoGLRenderAction to the scene graph managed here.

render(boolean, boolean) - Method in class com.openinventor.inventor.SoSceneManager

Deprecated.

As of Open Inventor 10100 No longer used and the parameters are ignored. Use render() instead.

render() - Method in interface com.openinventor.inventor.viewercomponents.SiRenderArea

Render the managed scene graph (see setSceneGraph).

render() - Method in class com.openinventor.inventor.viewercomponents.SoRenderAreaCore

Applies an SoGLRenderAction to the scene graph managed here.

RenderArea - Class in com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas

RenderArea() - Constructor for class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderArea

RenderArea(GLCapabilities) - Constructor for class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderArea

RenderArea - Class in com.openinventor.inventor.viewercomponents.awt.newt.renderareas

RenderArea() - Constructor for class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderArea

RenderArea(boolean) - Constructor for class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderArea

RenderArea - Class in com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas

RenderArea(Composite, int) - Constructor for class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderArea

RenderArea(Composite, int, GLCapabilities) - Constructor for class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderArea

RenderArea - Class in com.openinventor.remoteviz.rendering

Defines the rendering area.

RenderAreaExaminer - Class in com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas

RenderAreaExaminer() - Constructor for class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderAreaExaminer

RenderAreaExaminer(GLCapabilities) - Constructor for class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderAreaExaminer

RenderAreaExaminer - Class in com.openinventor.inventor.viewercomponents.awt.newt.renderareas

RenderAreaExaminer() - Constructor for class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderAreaExaminer

RenderAreaExaminer(boolean) - Constructor for class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderAreaExaminer

RenderAreaExaminer - Class in com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas

RenderAreaExaminer(Composite, int) - Constructor for class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderAreaExaminer

RenderAreaExaminer(Composite, int, GLCapabilities) - Constructor for class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderAreaExaminer

RenderAreaHardware - Class in com.openinventor.remoteviz.rendering

Settings to setup hardware of a render area.

RenderAreaHardware() - Constructor for class com.openinventor.remoteviz.rendering.RenderAreaHardware

Constructor.

RenderAreaHardware(RenderAreaHardware) - Constructor for class com.openinventor.remoteviz.rendering.RenderAreaHardware

Copy constructor.

RenderAreaInteractive - Class in com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas

RenderAreaInteractive() - Constructor for class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderAreaInteractive

RenderAreaInteractive(GLCapabilities) - Constructor for class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderAreaInteractive

RenderAreaInteractive - Class in com.openinventor.inventor.viewercomponents.awt.newt.renderareas

RenderAreaInteractive() - Constructor for class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderAreaInteractive

RenderAreaInteractive(boolean) - Constructor for class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderAreaInteractive

RenderAreaInteractive - Class in com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas

RenderAreaInteractive(Composite, int) - Constructor for class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderAreaInteractive

RenderAreaInteractive(Composite, int, GLCapabilities) - Constructor for class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderAreaInteractive

RenderAreaInteractive.ClippingPlanesAdjustMode - Enum in com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas

Camera clipping planes adjustment mode.
When adjustment mode is set to AUTO, the camera near and far planes are dynamically adjusted to be as tight as possible (least amount of stuff is clipped) before each render traversal.
When adjustment mode is set to MANUAL, the user is expected to manually set the camera near and far planes.

RenderAreaListener - Class in com.openinventor.remoteviz.rendering

This virtual class enables managing a RenderArea.

RenderAreaListener() - Constructor for class com.openinventor.remoteviz.rendering.RenderAreaListener

Default constructor.

renderAreaName - Variable in class com.openinventor.remoteviz.clients.nodes.SoRemoteVizClient

Specifies the renderArea name to which the client will connect.

RenderAreaSizeEventArg(SoRemoteVizClient, SbVec2s) - Constructor for class com.openinventor.remoteviz.clients.nodes.SoRemoteVizClient.RenderAreaSizeEventArg

Default constructor.

renderCaching - Variable in class com.openinventor.inventor.nodekits.SoInteractionKit

Deprecated.

As of Open Inventor 10300 This field is ignored. Render caching is set internally to ensure best performance.

renderCaching - Variable in class com.openinventor.inventor.nodekits.SoSeparatorKit

Deprecated.

As of Open Inventor 10300 This field is ignored. Render caching is set internally to ensure best performance.

renderCaching - Variable in class com.openinventor.inventor.nodes.SoSeparator

Deprecated.

As of Open Inventor 10300 This field is ignored. Render caching is set internally to ensure best performance.

renderCulling - Variable in class com.openinventor.inventor.nodekits.SoInteractionKit

Set render culling mode.

renderCulling - Variable in class com.openinventor.inventor.nodekits.SoSeparatorKit

Set render culling mode.

renderCulling - Variable in class com.openinventor.inventor.nodes.SoSeparator

Whether to cull during rendering traversal.

RenderEventArg(SiRenderArea) - Constructor for class com.openinventor.inventor.viewercomponents.SiRenderArea.RenderEventArg

renderMode - Variable in class com.openinventor.volumeviz.nodes.SoVolumeRender

Specifies the composition mode.

renderPrintType - Variable in class com.openinventor.inventor.nodes.SoAnnoText3Property

This flag specifies how annotation text should be rendered (as 3D text or 2D text) and how it should be printed when the Hard Copy Extension is used (as 3D vectors or 2D PostScript raster fonts).

renderProjection - Variable in class com.openinventor.inventor.geo.SoGeoRender

Geospatial projection.

renderStyle - Variable in class com.openinventor.inventor.nodes.SoFont

This field specifies the rendering style of the font.

renderToBuffer(SoBufferObject) - Method in class com.openinventor.inventor.SoOffscreenRenderArea

Render the given scene graph and save the result in the given buffer.

renderToFile(String) - Method in class com.openinventor.inventor.SoOffscreenRenderArea

Render the given scene graph and save the result in the given file.

renderToTextureProperty - Variable in class com.openinventor.inventor.nodes.SoTexture2

Specifies an SoRenderToTextureProperty node containing a scene graph that will be rendered to create the texture image.

renderToTextureProperty - Variable in class com.openinventor.inventor.nodes.SoTextureCubeMap

Specifies an SoRenderToTextureProperty node containing a scene graph that will be rendered to create the texture image.

renderUnitId - Variable in class com.openinventor.inventor.nodes.SoSeparator

Used during the ScaleViz depth compositing process, this field specifies which render unit (OIRU) will render the sub scene graph below this separator.

replace(SoNode, int, SoNode) - Method in class com.openinventor.inventor.misc.SoTranSender

Adds a REPLACE command to the transcription area.

replaceChild(int, SoNode) - Method in class com.openinventor.inventor.nodekits.SoNodeKitListPart

Replaces child with given index with new child.

replaceChild(SoNode, SoNode) - Method in class com.openinventor.inventor.nodekits.SoNodeKitListPart

Replaces first instance of given child with new child.

replaceChild(SoNode, SoNode) - Method in class com.openinventor.inventor.nodes.SoGroup

Replaces first instance of given child with new child.

replaceChild(int, SoNode) - Method in class com.openinventor.inventor.nodes.SoGroup

Replaces child with given index with new child.

replaceFieldContainer(SoFieldContainer, SoFieldContainer) - Method in class com.openinventor.inventor.fields.SoMFFieldContainer

Replaces first instance of given fieldContainer with new fieldContainer.

replaceFieldContainer(int, SoFieldContainer) - Method in class com.openinventor.inventor.fields.SoMFFieldContainer

Replaces fieldContainer with given index with new fieldContainer.

replaceManip(SoPath, SoClipPlane) - Method in class com.openinventor.inventor.manips.SoClipPlaneManip

Replaces this manipulator with a regular SoClipPlane node.

replaceManip(SoPath, SoDirectionalLight) - Method in class com.openinventor.inventor.manips.SoDirectionalLightManip

Replaces the tail of the path, which must be this manipulator, with the given SoDirectionalLight node.

replaceManip(SoPath, SoPointLight) - Method in class com.openinventor.inventor.manips.SoPointLightManip

Replaces the tail of the path, which must be this manipulator, with the given SoPointLight node.

replaceManip(SoPath, SoSpotLight) - Method in class com.openinventor.inventor.manips.SoSpotLightManip

Replaces the tail of the path, which must be this manipulator, with the given SoSpotLight node.

replaceManip(SoPath, SoTransform) - Method in class com.openinventor.inventor.manips.SoTransformManip

Replaces the tail of the path, which must be this manipulator, with the given SoTransform node.

replaceManip(SoPath, SoROI) - Method in class com.openinventor.ldm.manips.SoROIManip

Replaces the tail of the path, which must be this manipulator, with the given SoROI node.

replaceNode(SoNode, SoNode) - Method in class com.openinventor.inventor.fields.SoMFNode

Replaces first instance of given node with new node.

replaceNode(int, SoNode) - Method in class com.openinventor.inventor.fields.SoMFNode

Replaces node with given index with new node.

replaceNode(SoPath) - Method in class com.openinventor.inventor.manips.SoClipPlaneManip

Replaces a regular SoClipPlane node with this manipulator.

replaceNode(SoPath) - Method in class com.openinventor.inventor.manips.SoDirectionalLightManip

Replaces the tail of the path with this manipulator.

replaceNode(SoPath) - Method in class com.openinventor.inventor.manips.SoPointLightManip

Replaces the tail of the path with this manipulator.

replaceNode(SoPath) - Method in class com.openinventor.inventor.manips.SoSpotLightManip

Replaces the tail of the path with this manipulator.

replaceNode(SoPath) - Method in class com.openinventor.inventor.manips.SoTransformManip

Replaces the tail of the path with this manipulator.

replaceNode(SoPath) - Method in class com.openinventor.ldm.manips.SoROIManip

Replaces the tail of the path with this manipulator.

replaceShaderParameter(SoUniformShaderParameter, SoUniformShaderParameter) - Method in class com.openinventor.inventor.fields.SoMFUniformShaderParameter

Replaces first instance of given uniform shader parameter with new uniform shader parameter.

replaceShaderParameter(int, SoUniformShaderParameter) - Method in class com.openinventor.inventor.fields.SoMFUniformShaderParameter

Replaces uniform shader parameter with given index with new uniform shader parameter.

representation - Variable in class com.openinventor.meshviz.graph.PoMultipleHistogram

Representation type of the multiple histogram.

requestData(int, SbBox3i32, SbVec2i32, SoBufferObject) - Method in class com.openinventor.ldm.SoLDMDataAccess

Data values in a single seismic trace (a row of voxels along the volume X axis) are asynchronously copied into an application buffer.

requestData(int, SbBox3i32, SbVec3i32[], SoBufferObject) - Method in class com.openinventor.ldm.SoLDMDataAccess

Given a subvolume in voxel coordinates and a stack of line, asynchronously copies the data intersecting each line and the subvolume into an application buffer.

requestData(int, SbBox3i32, SbPlane, SoBufferObject) - Method in class com.openinventor.ldm.SoLDMDataAccess

Given a subvolume in voxel coordinates and a plane, asynchronously copies the data intersecting the plane and the subvolume into an application buffer.

requestData(int, SbBox3i32, SoBufferObject) - Method in class com.openinventor.ldm.SoLDMDataAccess

Given a subvolume in voxel coordinates, asynchronously copies the associated data into an application buffer.

requestData(int, SbBox3i32, SbLine, SoBufferObject) - Method in class com.openinventor.ldm.SoLDMDataAccess

Given a subvolume in voxel coordinates and a line, asynchronously copies the data intersecting the line and the subvolume into an application buffer.

requestRefetch(SoBufferAsyncNotifierInterface, double) - Method in class com.openinventor.ldm.tiles.SoCpuBufferAsyncBasicProperty

Ask to initiate an ansynchronous load of the data if not already in memory.

requestRenderAreaSize(SbVec2s) - Method in class com.openinventor.remoteviz.clients.nodes.SoRemoteVizClient

Sends a request to resize the renderArea associated with the connection.

requestURLData() - Method in class com.openinventor.inventor.nodes.SoWWWInline

Requests that URL data be fetched.

reSampling(SbVec3i32, SoVolumeData.SubMethods) - Method in class com.openinventor.volumeviz.nodes.SoVolumeData

Deprecated.

reSampling(SbVec3i32, SoVolumeData.SubMethods, SoVolumeData.OverMethods) - Method in class com.openinventor.volumeviz.nodes.SoVolumeData

Deprecated.

As of Open Inventor 9000 No longer supported. Please use SoLDMDataAccess class.

rescaleTexCoord - Variable in class com.openinventor.inventor.nodes.SoIndexedTexture2

This field controls the way an image with non-power-of-two dimension is handled: If the graphics card supports GL_ARB_texture_non_power_of_two , this field is ignored and the image is sent directly to OpenGL.

reset() - Method in class com.openinventor.inventor.actions.SoSearchAction

Resets options back to default values; clears list of returned paths.

reset(SoState, SoNode) - Static method in class com.openinventor.inventor.elements.SoBBoxModelMatrixElement

Allows the SoGetBoundingBoxAction to reset the current model matrix to identity and all currently-open local matrices to identity.

reset(SoState, int) - Method in class com.openinventor.inventor.elements.SoGLLazyElement

Destroys knowledge of GL state.

reset(SoState) - Static method in class com.openinventor.inventor.elements.SoWindowElement

Reset the element to default values.

reset - Variable in class com.openinventor.inventor.engines.SoCounter

At the next trigger, reset the counter to the specified value.

reset - Variable in class com.openinventor.inventor.engines.SoElapsedTime

Reset the base time.

reset - Variable in class com.openinventor.inventor.engines.SoTimeCounter

Reset the counter to the specified value.

reset() - Method in class com.openinventor.inventor.SbElapsedTime

Resets timer.

reset() - Method in class com.openinventor.ldm.SoLDMLargeDataManagement

The reset function is useful when using a customized LDM manager.

reset() - Method in class com.openinventor.meshvizxlm.mapping.nodes.MoCellFilter

Reset the cell filter interface to null (same as calling setCellFilter(null)).

reset() - Method in class com.openinventor.meshvizxlm.mapping.nodes.MoMesh

Resets the mesh interface to null (same as calling setMesh(null)).

reset() - Method in class com.openinventor.meshvizxlm.mapping.nodes.MoStringSet

Reset the associated string set to null (as if MoStringSet.setStringSet(MiStringSet) was called with null).

resetAll(SoState) - Static method in class com.openinventor.inventor.elements.SoLocalBBoxMatrixElement

Resets all current instances in the state to identity.

resetBuffer() - Method in class com.openinventor.inventor.SoOutput

Resets buffer for output again.

resetCache(SoNode) - Method in class com.openinventor.inventor.projection.SbProjectionCoordinates

Reset the cache.

resetCenter() - Method in class com.openinventor.inventor.actions.SoGetBoundingBoxAction

resetContinueActionInBranchFlag() - Method in class com.openinventor.inventor.actions.SoAction

This function resets the continue action flag.

resetFrameCounter() - Method in class com.openinventor.inventor.actions.SoGLRenderAction

Calls resetFrameCounter((int)0).

resetFrameCounter(int) - Method in class com.openinventor.inventor.actions.SoGLRenderAction

Reset the frame counter.

resetHeaderString() - Method in class com.openinventor.inventor.SoOutput

Resets the header for output files to be the default header.

resetHTMLBuffer() - Method in class com.openinventor.inventor.actions.SoToHTMLAction

Resets buffer of the HTML output for output again.

resetReader() - Method in class com.openinventor.ldm.nodes.SoDataSet

reset previously set custom reader setup by setReader call.

reshape(GLAutoDrawable, int, int, int, int) - Method in class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderArea

reshape(GLAutoDrawable, int, int, int, int) - Method in class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderArea

reshape(GLAutoDrawable, int, int, int, int) - Method in class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderArea

resize(long) - Method in class com.openinventor.inventor.caches.SoCpuBufferObjectCache

Resize cache to the given size.

resize(int, int) - Method in class com.openinventor.remoteviz.rendering.RenderArea

Resizes the renderArea at a specific size.

resizeHandles - Variable in class com.openinventor.inventor.draggers.SoTabBoxDragger

If set to true, handles will be resized at each camera motion.

resizeHandles - Variable in class com.openinventor.inventor.draggers.SoTabPlaneDragger

If set to true, handles will be resized automatically when the view matrix (camera) changes.

resolution - Variable in class com.openinventor.ldm.nodes.SoLDMResourceParameters

Resolution level for fixed resolution mode.

restoreAllHandles() - Method in class com.openinventor.ldm.readers.SoVolumeReader

Restore resources that were closed by closeAllHandles().

restoreAllHandles() - Method in class com.openinventor.ldm.writers.SoVolumeWriter

Restore ressources that was closed by closeAllHandles.

restoreCamera() - Method in class com.openinventor.inventor.viewercomponents.awt.glcanvas.renderareas.RenderAreaInteractive

restoreCamera() - Method in interface com.openinventor.inventor.viewercomponents.awt.IRenderAreaInteractive

Restore saved camera.

restoreCamera() - Method in class com.openinventor.inventor.viewercomponents.awt.newt.renderareas.RenderAreaInteractive

restoreCamera() - Method in class com.openinventor.inventor.viewercomponents.swt.glcanvas.renderareas.RenderAreaInteractive

restoreCamera() - Method in class com.openinventor.inventor.viewercomponents.swt.glcanvas.viewers.ViewerExaminer

returnedValue - Variable in class com.openinventor.inventor.actions.SoAction.PathIndices

returnedValue - Variable in class com.openinventor.inventor.fields.SoSFImage3.BufferObject

returnedValue - Variable in class com.openinventor.inventor.SbMatrix.Factorization

returnedValue - Variable in class com.openinventor.inventor.SbMatrixd.Factorization

returnedValue - Variable in class com.openinventor.volumeviz.details.SoVolumeDetail.TransparentDoubleValue

returnedValue - Variable in class com.openinventor.volumeviz.details.SoVolumeDetail.TransparentLongValue

reverseFlag - Variable in class com.openinventor.meshviz.graph.PoAxis

Allow to reverse the writing path of all axis texts.

rgb - Variable in class com.openinventor.inventor.nodes.SoBaseColor

RGB color(s).

rgbaMode - Variable in class com.openinventor.ldm.nodes.SoDataCompositor

Final composed buffer contains RGBA values (default is false).

RGBMapping() - Constructor for class com.openinventor.meshviz.graph.PbLinearDataMapping.RGBMapping

RGBTransparencyMapping() - Constructor for class com.openinventor.meshviz.graph.PbLinearDataMapping.RGBTransparencyMapping

rightOperand - Variable in class com.openinventor.inventor.nodes.SoCSGShape

Geometry scene graph to be used as right operand for the Boolean operation.

roi - Variable in class com.openinventor.imageviz.nodes.images.SoProxyDataAdapter

Defines a region of interest (ROI) in voxels on the original image.

roll(float) - Method in class com.openinventor.inventor.viewercomponents.SoCameraInteractor

Roll the camera.

rollAngle - Variable in class com.openinventor.inventor.engines.SoTrackFollower

Roll angle during the turn at a control point.

rollSpeed - Variable in class com.openinventor.inventor.engines.SoTrackFollower

Speed at which the roll angle is reached during a turn.

rootUrl - Variable in class com.openinventor.inventor.geo.SoGeoLOD

Url of the file that contains the root tile geometry.

rotate(float) - Method in class com.openinventor.inventor.viewercomponents.SoCameraInteractor

Rotate the camera around the center specified by setRotationCenter() and the axis specified by setRotationAxis().

rotate(SbRotation) - Method in class com.openinventor.inventor.viewercomponents.SoCameraInteractor

Rotate the camera.

rotateBy(SoState, SbRotation) - Static method in class com.openinventor.inventor.elements.SoLocalBBoxMatrixElement

Multiplies a matrix that performs the specified transformation into the local matrix.

rotateBy(SoState, SoNode, SbRotation) - Static method in class com.openinventor.inventor.elements.SoModelMatrixElement

This multiplies a matrix that performs the specified transformation into the model matrix.

rotateBy(SoState, SoNode, SbRotation) - Static method in class com.openinventor.inventor.elements.SoTextureMatrixElement

Multiplies a matrix that performs the specified transformation into the texture matrix.

rotateCamera(SbRotation) - Method in class com.openinventor.inventor.SbViewVolume

Rotate the camera view direction.

rotateYUp - Variable in class com.openinventor.inventor.geo.SoGeoOrigin

Specifies whether coordinates of nodes that use this GeoOrigin are to be rotated such that their up direction is aligned with the world coordinate Y axis.

rotation - Variable in class com.openinventor.inventor.draggers.SoCenterballDragger

Orientation of the centerball dragger.

rotation - Variable in class com.openinventor.inventor.draggers.SoDirectionalLightDragger

Orientation of the rotating part (an arrow by default).

rotation - Variable in class com.openinventor.inventor.draggers.SoJackDragger

Orientation of the dragger.

rotation - Variable in class com.openinventor.inventor.draggers.SoRotateCylindricalDragger

Orientation of the dragger.

rotation - Variable in class com.openinventor.inventor.draggers.SoRotateDiscDragger

Orientation of the dragger.

rotation - Variable in class com.openinventor.inventor.draggers.SoRotateSphericalDragger

Orientation of the dragger.

rotation - Variable in class com.openinventor.inventor.draggers.SoSpotLightDragger

Orientation of the rotating part (an arrow by default).

rotation - Variable in class com.openinventor.inventor.draggers.SoTrackballDragger

Orientation of the dragger.

rotation - Variable in class com.openinventor.inventor.draggers.SoTransformBoxDragger

Orientation of the dragger.

rotation - Variable in class com.openinventor.inventor.draggers.SoTransformerDragger

Orientation of the dragger.

rotation - Variable in class com.openinventor.inventor.engines.SoComposeMatrix

Rotation.

rotation - Variable in class com.openinventor.inventor.engines.SoComposeRotation

( SoMFRotation ) Rotation field, defined by the inputs.

rotation - Variable in class com.openinventor.inventor.engines.SoComposeRotationFromTo

( SoMFRotation ) A rotation that transforms one vector into another.

rotation - Variable in class com.openinventor.inventor.engines.SoDecomposeMatrix

( SoMFRotation ) Derived rotation.

rotation - Variable in class com.openinventor.inventor.engines.SoDecomposeRotation

Rotation to be decomposed.

rotation - Variable in class com.openinventor.inventor.nodes.SoRotation

Rotation specification.

rotation - Variable in class com.openinventor.inventor.nodes.SoTexture2Transform

Counterclockwise rotation of the coordinate space, in radians.

rotation - Variable in class com.openinventor.inventor.nodes.SoTexture3Transform

Counterclockwise rotation of the coordinate space, in radians.

rotation - Variable in class com.openinventor.inventor.nodes.SoTransform

Rotation specification.

rotation - Variable in class com.openinventor.inventor.SbMatrix.Decomposition

rotation - Variable in class com.openinventor.inventor.SbMatrixd.Decomposition

rotation0 - Variable in class com.openinventor.inventor.nodes.SoPendulum

Defines the first of the two fixed rotations that are interpolated to create the pendular motion.

rotation1 - Variable in class com.openinventor.inventor.nodes.SoPendulum

Defines the second of the two fixed rotations that are interpolated to create the pendular motion.

rotationAngle - Variable in class com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms.SoRotateAroundZProcessing2d

The angle of the rotation in degrees (not radians).

rotationAngle - Variable in class com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms.SoRotateProcessing2d

The angle of the rotation in degrees (not radians).

rotationAngle - Variable in class com.openinventor.imageviz.engines.imageanalysis.morphometry.SoInertiaMomentProcessing2d

The orientation of the rotation axis in degrees (not radians).

rotationAngleX - Variable in class com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms.SoRotateProcessing3d

The angle of rotation in degrees (not radians) for the OX axis.

rotationAngleY - Variable in class com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms.SoRotateProcessing3d

The angle of rotation in degrees (not radians) for the OY axis.

rotationAngleZ - Variable in class com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms.SoRotateProcessing3d

The angle of rotation in degrees (not radians) for the OZ axis.

rotationCenter - Variable in class com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms.SoRotateProcessing2d

The rotation center coordinates.

rotationCenterX - Variable in class com.openinventor.imageviz.engines.imageanalysis.morphometry.SoInertiaMomentProcessing2d

The X coordinate of the rotation axis.

rotationCenterY - Variable in class com.openinventor.imageviz.engines.imageanalysis.morphometry.SoInertiaMomentProcessing2d

The Y coordinate of the rotation axis.

rowName - Variable in class com.openinventor.meshviz.graph.PoMultipleHistogram

List of numRows names of the rows.

Ruler - Class in com.openinventor.medical.nodes

(Preview Feature) Interactive distance measuring tool for SoOrthoSlice.

Ruler() - Constructor for class com.openinventor.medical.nodes.Ruler

Constructor

run() - Method in class com.openinventor.inventor.sensors.SoSystemTimerTask

This method is executed by SoSystemTimer when it is triggered .

run(SoAction) - Method in interface com.openinventor.inventor.SoSceneManager.AbortRenderTask

Invoked by some Open Inventor nodes to know if the specified action should be aborted.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z