| SoSFImage3 Methods |
The SoSFImage3 type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | AppendConnection(SoEngineOutput) | Appends this field to the list of connections from another engineOutput. |
| AppendConnection(SoField) | Appends this field to the list of connections from another field. |
| AppendConnection(SoVRMLInterpOutput) | Appends this field to the list of connections from another interpOutput. |
| ConnectFrom(SoEngineOutput) | Connects this field from an engine output. |
| ConnectFrom(SoField) | Connects this field to another field. |
| ConnectFrom(SoVRMLInterpOutput) | Connects this field from an interpOutput. |
| CopyFrom | Copy from another field of same type. |
| Disconnect | Disconnect the field from whatever it was connected to. |
| Disconnect(SoEngineOutput) | Disconnect the field from the requested engineOutput. |
| Disconnect(SoField) | Disconnect the field from the requested field. |
| Disconnect(SoVRMLInterpOutput) | Disconnect the field from the requested interpOutput. |
| EnableConnection | Field connections may be enabled and disabled. |
| Equals | (Overrides SoFieldEquals(Object).) |
| FinishEditing | These methods can be used to efficiently edit the values in an image field. |
| Get | Returns the value of the field in the Open Inventor file format, even if the field has its default value. |
| GetBufferObject | |
| GetBufferObject(SbVec3s, Int32) | Returns the pixels in the image as a buffer object. |
| GetConnectedEngine | Returns true if this field is being written into by an engine, and returns the engine output it is connected to in engineOutput. |
| GetConnectedField | Returns true if this field is being written into by another field, and returns the field it is connected to in writingField. |
| GetConnectedVRMLInterp | Returns the VRMLInterpolator output field is connected to. |
| GetConnections | Returns a list of the connections to this field. |
| GetContainer | Returns the object that contains this field. |
| GetForwardConnections | Adds references to all of the fields that this field is writing into (either fields in nodes, global fields or engine inputs) to the given field list, and returns the number of forward connections. |
| GetHashCode |
Overrides GetHashCode().
(Inherited from SoNetBase.) |
| GetNumConnections | Returns the number of connections to this field. |
| GetSubTexture | Returns a buffer to a given subTexture set by setSubValue or setSubValues. |
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| GetValue | Returns the pixels in the image as an array of unsigned chars. |
| HasSubTextures | Returns true if subTextures have been defined or false if none have been defined. |
| IsConnected | Returns true if the field is connected to anything. |
| IsConnectedFromEngine | Returns true if the field is connected to an engine's output. |
| IsConnectedFromField | Returns true if the field is connected to another field. |
| IsConnectedFromVRMLInterp | Returns true if the field is connected to a VRML interpOutput. |
| IsConnectionEnabled | Returns false if connections to this field are disabled. |
| IsDefault | Gets the state of default flag of the field. |
| IsIgnored | Gets the ignore flag for this field. |
| IsNeverWrite | As this field may have to handle large amounts of data and its representation in an .iv file is not very efficient, it is often a good idea not to allow that data to be written out when required by a write action. |
| Set | Sets the field to the given value, which is an ASCII string in the Open Inventor file format. |
| SetIgnored | Sets the ignore flag for this field. |
| SetNeverWrite | As this field may have to handle large amounts of data and its representation in an .iv file is not very efficient, it is often a good idea not to allow that data to be written out when required by a write action. |
| SetSubValue(SbVec3s, SbVec3s, Byte) | Calls SetSubValue(subSize, offset, bytes, OIV.Inventor.Fields.SoSFImage3.CopyPolicies( .SoSFImage3.COPY )). |
| SetSubValue(SbVec3s, SbVec3s, Byte, SoSFImage3CopyPolicies) | These methods may be used for subtexturing: instead of replacing the entire texture in texture memory, only parts of it are replaced. |
| SetSubValues(SbVec3s, SbVec3s, Int32, Byte) |
Calls #SetSubValues with COPY as last argument
|
| SetSubValues(SbVec3s, SbVec3s, Int32, Byte, SoSFImage3CopyPolicies) |
This method can be used for subtexturing.
|
| SetValue(SbVec3s, Int32, SoBufferObject) | Calls SetValue(size, nc, bufferObject, OIV.Inventor.Fields.SoSFImage3.CopyPolicies( .SoSFImage3.COPY )). |
| SetValue(SbVec3s, Int32, Byte) | Calls SetValue(size, nc, bytes, OIV.Inventor.Fields.SoSFImage3.CopyPolicies( .SoSFImage3.COPY )). |
| SetValue(SbVec3s, Int32, SoBufferObject, SoSFImage3CopyPolicies) | |
| SetValue(SbVec3s, Int32, Byte, SoSFImage3CopyPolicies) | setValue copies the image given to it into internal storage. |
| StartEditing | These methods can be used to efficiently edit the values in an image field. |
| ToString | Returns a string that represents the current object. (Inherited from Object.) |
| Touch | Simulates a change to the field, causing attached sensors to fire, connected fields and engines to be marked as needing evaluation, and so forth. |
See Also